Comfort and allergenic properties

Besides its high chemical and puncture resistance, the primary advantage of nitrile as a disposable

glove material is its comfortable fit and its 100% latex-free construction.

These pairs of gloves can be comfortably worn for extended periods, even by personnel with a latex

allergy.

In rare cases, specific individuals may experience allergic reactions when wearing nitrile gloves. The

most common symptom is allergic contact dermatitis, a Type IV hypersensitivity reaction, typically

caused by allergenic additives, such as glove powder (designed to absorb sweat moisture and make

donning and doffing easier) or sulfur-based accelerants (intended to increase the gloves’ elasticity).

Although these symptoms are much milder and less dangerous than a typical later allergy, you can prevent these issues by choosing powder-free and accelerator-free nitrile glove models.

Different cuff lengths for specific applications

Nitrile gloves are available in various cuff lengths suitable for various applications. Standard short-cuff gloves are suitable for general use and most applications.

For long-term surgical applications (more than 20 minutes) or any situations with a high risk of blood projection, long-cuffed models (8” to 12” in length) provide pathogen protection from the fingertips to the forearms.

To pass the FDA’s medical-grade certifications, a specific brand of nitrile gloves must pass blood-borne pathogen penetration resistance tests and not possess additives unsuitable for surgeries or medical exams (e.g., glove powder).

Recommended Usages

Hospital, pharmaceutical and dental

House, supermarket and hotel cleaning

Beauty and salon

Food service and food processing

Storage

The gloves shall maintain their properties when stored in a dry condition. Avoid direct sunlight;

Main Ingredients

Nitrile examination gloves are made of 100% NBR, other plasticizers, anti-aging agents, accelerators, emulsifiers and other auxiliary materials;

Process Flow

It is processed by mixing, vulcanization and other molding process

Main Performance

Ductility, permeability resistance, heat resistance, corrosion resistance, puncture resistance

Quality & Conformity

FDA 510(K); CE; EU 2016/425 Category III; MDR2017/745;CE(0075);

GB4806.7-2016；

ASTM 5151; ASTM 6124; ASTM 6319; ASTM7160;

ISO9001; ISO10993; ISO13485; ISO21420;ISO11193;

EN374-1; EN374-2; EN374-3; EN374-4; EN374-5;

EN455-1; EN455-2; EN455-3; EN455-4; EN455-5;

Main Specification

Size: XS，S, M, L, XL，XXL 

1.5AQL

Finger thickness: 3.5mil, 4.5mil, 5mil

Elongation≥500

Tensile Strength≥14Mpa

Maximum Force≥10

Particular Attention

Please trim your nails before wearing. Too long or too sharp nails will easily damage the gloves